The packaging machine is indispensable to the factory. As the production speed continues to increase, the ordinary packaging machine can no longer keep up with the speed. At this time, the working efficiency of the automatic packaging machine will become relatively high, and no manual work is required. After operation, it can be operated automatically only by pressing the button. This not only saves labor costs, but also increases work efficiency. So how can the automatic packaging machine operate better?

 

Automatic packaging machine operation:

1. Try to avoid or eliminate the influence of static electricity

The automatic packaging machine is prone to static electricity when labeling, but static electricity will have a certain impact on the effect of labeling. This can generally be improved by increasing the humidity of the labeling site, and at the same time, it can also control the cleanliness inside the equipment, so that The labeling can be kept away from dust, thereby improving the labeling quality of the product.

2. Improve the surface quality of the attached hose

Many products have a lot of varnish on the surface, which increases the difficulty of labeling, and also allows the content to seep out, and the micro-holes in the tube wall will cause the label to lift. In the process of machine labeling, control the pressure of labeling or pay attention to the temperature of labeling.

3. Adjust the eccentric bolt to adjust the gap of the squeegee

From a structural point of view, there is generally only mutual contact between the target plate and the rubber roller, and there is no pressure. At this time, the size of the gap can be adjusted by adjusting the bearing seat at the lower part of the rubber roller, and the upper part of the rubber roller can be adjusted if necessary. bearing adjustment.